Need some pointers on profec B install
#1
Douchebaggery!!!
Thread Starter
Join Date: Dec 2002
Location: Preferably some place warm.
Posts: 641
Likes: 0
Received 0 Likes
on
0 Posts
Need some pointers on profec B install
Alright....now I know that the box for the profec that mounts under the hood has an in and an out now the in if I am correct should pull it's reading from the compressor housing for the turbo.....as well as the reading from the waste gate....the of course the out line coming off the box would go to the back of the module inside the car. If I am correct then my next question is where would be a safe place to tap into a 12v line when the ignition is turned on. I already tapped into the ecu for my shift light and really don't want to be running too much crap off of that same one.....so im thinking that the switchable 12v power for the turbo timer would be my 2nd best choice. Any insight on this would be greatly appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
2fast4ya
757
2
08-12-2005 05:49 PM
nickyroo
Offroad / 4x4
17
06-10-2005 12:02 PM