Were can i get my rear tubbed and axles cut????
#1
mr.saltine
Thread Starter
Join Date: Oct 2008
Location: uptown bad newz zone 6
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
Were can i get my rear tubbed and axles cut????
im trynna get a mini tub an axles shortrend on my 2000 mustang so i can stagg it out with a 7-8 inch lip.Any spped shops out here or guys on here that might csn link me to someone?
#2
baller/dickbutt#69
Join Date: Nov 2002
Location: hampton
Posts: 16,059
Likes: 0
Received 0 Likes
on
0 Posts
Re: Were can i get my rear tubbed and axles cut????
how narrow? to do the axle and have the stock axles resplined is around 500...then you need the body cut and tubbed,may lose your back seat..or at least have to cut it down a few inches..
#3
mr.saltine
Thread Starter
Join Date: Oct 2008
Location: uptown bad newz zone 6
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
Re: Were can i get my rear tubbed and axles cut????
prolley no mor than 3-4 inches.I wanna do 24s with a 8 inch lip in the back.i can prolly squeeze a 3.5 as of right now.lando told me come round there when i was over there the otha day but i was on a mission. for the body u think imma have to do alot to get 4 inches?
#4
baller/dickbutt#69
Join Date: Nov 2002
Location: hampton
Posts: 16,059
Likes: 0
Received 0 Likes
on
0 Posts
Re: Were can i get my rear tubbed and axles cut????
i thought that was your car going out newsome(bumpy ass road)
you may not have to cut that much.. need the wheel/tire to be able to tell for sure...since as you know backspacing has everything to do with it...
and you may lose part of the inner panel structure and that may have to be redone to support the rear end...it may be a whole lot more than its worth..
but worse case swing on by and we can look and pull some quick measurements and go from there
you may not have to cut that much.. need the wheel/tire to be able to tell for sure...since as you know backspacing has everything to do with it...
and you may lose part of the inner panel structure and that may have to be redone to support the rear end...it may be a whole lot more than its worth..
but worse case swing on by and we can look and pull some quick measurements and go from there
#5
mr.saltine
Thread Starter
Join Date: Oct 2008
Location: uptown bad newz zone 6
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
Re: Were can i get my rear tubbed and axles cut????
i thought that was your car going out newsome(bumpy ass road)
you may not have to cut that much.. need the wheel/tire to be able to tell for sure...since as you know backspacing has everything to do with it...
and you may lose part of the inner panel structure and that may have to be redone to support the rear end...it may be a whole lot more than its worth..
but worse case swing on by and we can look and pull some quick measurements and go from there
you may not have to cut that much.. need the wheel/tire to be able to tell for sure...since as you know backspacing has everything to do with it...
and you may lose part of the inner panel structure and that may have to be redone to support the rear end...it may be a whole lot more than its worth..
but worse case swing on by and we can look and pull some quick measurements and go from there
#8
mr.saltine
Thread Starter
Join Date: Oct 2008
Location: uptown bad newz zone 6
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts