I have an E30 project located in Norfolk, VA that I'm not going to be able to finish due to a work transfer. I would like to hand off this project as a whole and am open to offers. Car is currently a roller but includes everything you need to complete the build

Here is everything I have as I remember it.

- 1987 325IS with ~200k miles w/clear title
- 1986 325e parts car w/no title - This was left with a mechanic for 2 years with a lien. Should be no issue to get a title. It's an automatic that is complete w/no parts removed

- Completely rebuilt head w/new OEM cam completed Abacus racing
- Block has been dipped, painted, honed, and new freeze plugs, and half shaft bearing was turned again @ Abacus
- Every part to complete all full rebuild is new and in boxes. All parts/seals are German OEM spec parts. No cheap stuff
- Used set of pistons from M20 w/75k
- SPEC clutch w/20k miles - flywheel was resurfaced and balanced by Abacus
- Mark D'sylva reflashed ECU programmed for 93 octane and 17# or 19# injectors
- e28 intake stretched to fit the m20 - I have two m20 AFMs
- Full silicon hose kit minus radiator hoses - I have all the original hoses
- New front wheel bearings in box
- New front lower control arms in box w/bushings
- New tie rods and sway bar ends in box w/bushings
- Energy two-piece poly control arm bushings
- Poly engine mounts
- Rebuilt gauge cluster w/all new gears
- Freshly powder coated intake and valve cover in black
- Transmission mount bushings in box
- Crack free dash in box
- Used e36 sport seats and e30 adapters
- Full set of ATE performance rotors in box
- Axxis ceramic pads
- Bilstein rear sport shocks w/3k miles on them (look brand new). Car currently has adjustable Tokico shocks all around but are in unknown condition
- Bavarian Autosport sport springs
- Konig 17" rims that have been painted and are in pretty decent shape w/good tires
- Interior parts and misc bits like speed bleeders and other items are too minor to include
- I'm sure I'm missing some other things here...
- Bentley service manual... You'll need it

Here are a couple pics. I can provide more

http://dl.dropbox.com/u/42147/e30/car.JPG
http://dl.dropbox.com/u/42147/e30/head.jpg
http://dl.dropbox.com/u/42147/e30/partscar.JPG

This is a project and all parts are currently in boxes and both vehicles will need to be towed.

I didn't cheap out on anything in this project. I probably have $5k in this project already and had big plans for this 'lil car. I understand I won't get anywhere near that back out of it and will consider all offers. I am open to trades but not project cars as I will lack the garage space =\

thanks!

 

text me i am interested in your cars...(757)869-2837

Aaron

 

text me man i want the cars 7576424265