wiring up radio
#1
Registered member
Thread Starter
Join Date: Jan 2011
Location: newport news
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
wiring up radio
ok, i have a new stereo in my car..it works and everything but it just won't hold presets after i turn the car off then turn back on, stations go back to default. any help would be greatly appreciated.
it came with a wiring harness and all wires are color-coded correctly soooo idk...
it came with a wiring harness and all wires are color-coded correctly soooo idk...
#2
Registered Member
Join Date: Sep 2006
Location: Hampton, VA
Posts: 1,621
Likes: 0
Received 0 Likes
on
0 Posts
Re: wiring up radio
Make sure that you run the yellow wire straight to +12v (memory) unswitched source. The Red wire (Switched ignition) should run to the ignition.
Last edited by vxcoastie; 01-25-2011 at 01:11 PM.
#3
VaDriven Mayhem
Join Date: Sep 2004
Location: Where the faggles are.
Posts: 21,312
Likes: 0
Received 0 Likes
on
0 Posts
Re: wiring up radio
ok, i have a new stereo in my car..it works and everything but it just won't hold presets after i turn the car off then turn back on, stations go back to default. any help would be greatly appreciated.
it came with a wiring harness and all wires are color-coded correctly soooo idk...
it came with a wiring harness and all wires are color-coded correctly soooo idk...
Somewhere it's not connected to an always hot wire so that when you shut it off, the radio loses the memory.
Try rewiring again.
#5
True Customs
Join Date: Mar 2003
Location: Hampton
Posts: 2,102
Likes: 0
Received 0 Likes
on
0 Posts
Re: wiring up radio
what kind of car is it? allot of newer cars you have to run a constant power to the main ignition harness for an aftermarket radio to get 12v stock radio runs off a lower input
Thread
Thread Starter
Forum
Replies
Last Post