Need Help! B16A swap wont run!
#1
Registered Member
Thread Starter
Join Date: Mar 2011
Location: Chesapeake VA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Need Help! B16A swap wont run!
I recently bought a 1990 Honda Civic dx hatch with a B16A swap. The car ran fine for about 3 maybe 4 hours then had to get towed home by a friends crx. While driving it I noticed every time I brought it down to idle it would try to bog out but manged to keep it running with a little throttle. I've changed the fuel pump, checked injectors, and it has a new fuel filter. I checked to see if it jumped timing but it didn't. New plugs and wires. The distributor that's on it reads TD-23U but i was told its the wrong one for the motor. Car ran fine with it but i would like to figure out the right one for this motor?? ECU=PWO.
Help on this issue would be awesome so let me know what you come up with. Mean time I'm still searching blindfolded for the problem.
Help on this issue would be awesome so let me know what you come up with. Mean time I'm still searching blindfolded for the problem.
#3
WEEEEEEEEEEE
Re: Need Help! B16A swap wont run!
I recently bought a 1990 Honda Civic dx hatch with a B16A swap. The car ran fine for about 3 maybe 4 hours then had to get towed home by a friends crx. While driving it I noticed every time I brought it down to idle it would try to bog out but manged to keep it running with a little throttle. I've changed the fuel pump, checked injectors, and it has a new fuel filter. I checked to see if it jumped timing but it didn't. New plugs and wires. The distributor that's on it reads TD-23U but i was told its the wrong one for the motor. Car ran fine with it but i would like to figure out the right one for this motor?? ECU=PWO.
Help on this issue would be awesome so let me know what you come up with. Mean time I'm still searching blindfolded for the problem.
Help on this issue would be awesome so let me know what you come up with. Mean time I'm still searching blindfolded for the problem.
.
#4
Registered Member
Thread Starter
Join Date: Mar 2011
Location: Chesapeake VA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need Help! B16A swap wont run!
Car only runs when on incline hills and fuel pump barley feeds fuel. What could be my issue?? car has half a tank of 93.
#5
Registered Member
Join Date: Apr 2005
Location: chesapeake
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need Help! B16A swap wont run!
change fuel filter.....or bypass it to see if pressure goes up... check voltage to fuelpump...check fp relay.
Last edited by aacjohnc; 04-19-2011 at 08:48 AM.
Thread
Thread Starter
Forum
Replies
Last Post