Notices
Tech Talk Anything technically related to your vehicle should be posted here. If you're looking to have work done, try one of the Regional Forums.

honda rev limit

Thread Tools
 
Old Jul 9, 2011 | 07:24 AM
  #1  
jmiller1846's Avatar
jmiller1846
Thread Starter
Registered Member
 
Joined: Mar 2011
Posts: 29
Likes: 0
jmiller1846 has disabled reputation
Default honda rev limit

Ok so I just put a new b16 bottom end in from the machine shop. Cars runs good but sounds like its misfireing at idle and leaks very little smoke out of the breather. When I go to give it gas it sputters and only lets me go to 4000 rpms. But the inside of the distributor the plastic black wheel is broke off. Can that be the problem
Old Jul 9, 2011 | 07:31 AM
  #2  
Victum's Avatar
Victum
boom tick boom tick
 
Joined: Nov 2002
Posts: 9,295
Likes: 0
From: Earth
Victum Victum Victum Victum Victum Victum Victum Victum Victum Victum Victum
Default Re: honda rev limit

your car is in limp mode bro.. like your weener.
Old Jul 9, 2011 | 07:37 AM
  #3  
jmiller1846's Avatar
jmiller1846
Thread Starter
Registered Member
 
Joined: Mar 2011
Posts: 29
Likes: 0
jmiller1846 has disabled reputation
Default Re: honda rev limit

Obviously its in limp but why!! And you saying something about my dick is a little homo
Old Jul 9, 2011 | 07:40 AM
  #4  
Tarzan Bakerada's Avatar
Tarzan Bakerada
Needs more poke.
 
Joined: Feb 2004
Posts: 6,413
Likes: 0
From: Brunswick, ME
Tarzan Bakerada Tarzan Bakerada Tarzan Bakerada Tarzan Bakerada Tarzan Bakerada Tarzan Bakerada Tarzan Bakerada Tarzan Bakerada Tarzan Bakerada Tarzan Bakerada Tarzan Bakerada
Default Re: honda rev limit

im here for the limp dicks...
Old Jul 9, 2011 | 07:46 AM
  #5  
boredom's Avatar
boredom
management
 
Joined: Aug 2009
Posts: 5,412
Likes: 0
From: choosing seats
boredom boredom boredom boredom boredom boredom boredom boredom boredom boredom boredom
Default

Wow, u say the wheel inside the cap is broken...that's the problem. Go buy another one from autozone for 10bux and stop being cheap
Old Jul 9, 2011 | 07:50 AM
  #6  
jmiller1846's Avatar
jmiller1846
Thread Starter
Registered Member
 
Joined: Mar 2011
Posts: 29
Likes: 0
jmiller1846 has disabled reputation
Default Re: honda rev limit

I didn't know it was broke til I looked at it
Old Jul 9, 2011 | 08:06 AM
  #7  
CoasTek240's Avatar
CoasTek240
Registered User
 
Joined: Dec 2002
Posts: 133
Likes: 0
From: VA
CoasTek240 is a jewel in the roughCoasTek240 is a jewel in the roughCoasTek240 is a jewel in the roughCoasTek240 is a jewel in the rough
Default Re: honda rev limit

limp mode, really?


replace the distributor
Old Jul 9, 2011 | 09:51 AM
  #8  
Fabrik8's Avatar
Fabrik8
Racetracks
 
Joined: Nov 2002
Posts: 15,668
Likes: 0
From: How long is a piece of string?
Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8
Default Re: honda rev limit

The answer is yes. A broken distributor will cause engine problems. Fix the distributor.
Old Jul 9, 2011 | 09:56 AM
  #9  
nftuatn's Avatar
nftuatn
baller/dickbutt#69
 
Joined: Nov 2002
Posts: 16,059
Likes: 0
From: hampton
nftuatn nftuatn nftuatn nftuatn nftuatn nftuatn nftuatn nftuatn nftuatn nftuatn nftuatn
Default Re: honda rev limit

And also if you cut the white 10ga wire under the column it will get rid of the rev limiter and you will be able to rev till 9k
Old Jul 9, 2011 | 09:58 AM
  #10  
nftuatn's Avatar
nftuatn
baller/dickbutt#69
 
Joined: Nov 2002
Posts: 16,059
Likes: 0
From: hampton
nftuatn nftuatn nftuatn nftuatn nftuatn nftuatn nftuatn nftuatn nftuatn nftuatn nftuatn
Default Re: honda rev limit

Originally Posted by jmiller1846
Ok so I just put a new b16 bottom end in from the machine shop. Cars runs good but sounds like its misfireing at idle and leaks very little smoke out of the breather. When I go to give it gas it sputters and only lets me go to 4000 rpms. But the inside of the distributor the plastic black wheel is broke off. Can that be the problem
And why are you reving the shit out of a brand new motor?ever heard of breaking them in?



All times are GMT -8. The time now is 04:00 PM.