Integra Door Seal / Weatherstripping
#1
Integra Door Seal / Weatherstripping
Does anyone have any experience with replacing the weatherstripping aka door seal on an integra?
I could use some pointers before I dive into this and accidentally rip the seals. Any help or suggestions is greatly appreciated.
I could use some pointers before I dive into this and accidentally rip the seals. Any help or suggestions is greatly appreciated.
#2
Mr. Fixit
Join Date: Jan 2010
Location: CHARLOTTESVILLE, VA
Posts: 922
Likes: 0
Received 0 Likes
on
0 Posts
Re: Integra Door Seal / Weatherstripping
if you are replacing with brand new its very simple
grab one corner and pull off completely
there should be small plastic clips still in door sill take those out the new seal should have those on it install in reverse order making sure to push clips all the way in
once you pull the old stuff off you should have no problem with it
good luck
grab one corner and pull off completely
there should be small plastic clips still in door sill take those out the new seal should have those on it install in reverse order making sure to push clips all the way in
once you pull the old stuff off you should have no problem with it
good luck
#3
Re: Integra Door Seal / Weatherstripping
i used a thin pallette knife from work to take mine off. Just start from one side and slowly work your way to the other. Make sure you take off all the remaining seal!
#4
Whatever it takes
Join Date: Aug 2005
Location: va beach
Posts: 2,736
Likes: 0
Received 0 Likes
on
0 Posts
Re: Integra Door Seal / Weatherstripping
anyone know of a good site to get replacement seals from? the dealer no longer carries mine for my 1992 four door integra.