Notices
Import - ASIA Vehicles from Japanese, Korean, Chinese(?) manufacturers go here.

Greddy, Aeromotive,Signal, Garret, s13 SR20DET

Thread Tools
 
Old 11-05-2012 | 05:03 PM
  #1  
Srtwinkie's Avatar
Srtwinkie
Thread Starter
Registered Member
 
Joined: Aug 2009
Posts: 76
Likes: 0
From: Mechanicsville
Srtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these parts
Exclamation Greddy, Aeromotive,Signal, Garret, s13 SR20DET

Name: Ryan
Location: Richmond
Cell:443-915-4132
Price: $8,500 obo

1990 240sx SE

Paint: 9 out of 10 there are three small ding on the door. the Paint is in Almost flawless shape for a 1990
Miles: engine has around 40k
Trades: Is300, WRX, gs300, or G35 sedan

Car should have 350+ whp on 10 psi. This is a low number for HP since I do not have a dyno sheet was told by the tuneing company it should have around 385. Turbo is fully spooled at 3,800 rpm.


Modifications:

V-band downpipe extension
Braided Turbo Oil and Coolant LInes
Aeromotive Fuel Pressure Regulator
Brian Crower 264\264 camshafts
Greddy Rocker Arm stoppers
Megan Solid Motor mounts
Megan solid Transmission mounts
FiveO 750cc Injectors
ISIS Oil pan
Turbonetics 50mm .48 a/r
Treadstone topmount log style manifold
Godspeed 38mm external wastegate
Spec Aluminum Flywheel
Compition Six Puck clutch
Apexi N1 Gt Spec One Piece Exhaust (3.75 in)
3 inch Downpipe
3 in cold air intake
z32 MAF
HKS Mushroom Filter
B&M Short Shifter


Suspension:

ISIS Traction Rods
ISIS Upper control arms
ISIS Tension Rods
ISIS Toe Rods
Tien Coilovers
ER Spec Steel one piece drive shaft
S14 Silvia V-LSD
Front Strut brace
Rear Strut Brace

Electronics:
Enthalpy Tune for 16 psi
Aem Eugo Wideband
Autometer Oil Pressure gauge
Autometer Boost Gauge
Pillar Pod

Exterior:
Unknown 15 in Rims
180sx kouki Tail lights

Extras:
One Sr20det ECU with a base map from Scott hennessey
Sr20det Transmision
OEM clutch and flywheel
OEM T25 Turbo
Garret gt28r
Megan tubeular manifold
Trust turbo outlet pipe
Greddy Type S BOV
Greddy Intake manifold cold pipepipe


Mobile

Last edited by Srtwinkie; 04-18-2014 at 08:35 AM. Reason: update
Old 11-05-2012 | 05:06 PM
  #2  
Srtwinkie's Avatar
Srtwinkie
Thread Starter
Registered Member
 
Joined: Aug 2009
Posts: 76
Likes: 0
From: Mechanicsville
Srtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these parts
Default Re: Greddy, Aeromotive,Signal, Garret, s13 SR20DET

Bump

Last edited by Srtwinkie; 11-26-2013 at 03:24 AM.
Old 11-05-2012 | 07:53 PM
  #3  
The Nisbro's Avatar
The Nisbro
SAY IT WITCHA CHEST!
 
Joined: Mar 2007
Posts: 3,949
Likes: 0
From: Outer Space
The Nisbro The Nisbro The Nisbro The Nisbro The Nisbro The Nisbro The Nisbro The Nisbro The Nisbro The Nisbro The Nisbro
Default Re: Greddy, Aeromotive,Signal, Garret, s13 SR20DET

good god, you're asking price is outrageous.

good luck with that...
Old 11-05-2012 | 08:41 PM
  #4  
bobbyd!'s Avatar
bobbyd!
Registered member
 
Joined: Mar 2011
Posts: 146
Likes: 0
bobbyd! has disabled reputation
Default Re: Greddy, Aeromotive,Signal, Garret, s13 SR20DET

Just saying...the same set up goes for around half your price.

Glws though
Old 11-06-2012 | 10:34 AM
  #5  
Srtwinkie's Avatar
Srtwinkie
Thread Starter
Registered Member
 
Joined: Aug 2009
Posts: 76
Likes: 0
From: Mechanicsville
Srtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these parts
Default Re: Greddy, Aeromotive,Signal, Garret, s13 SR20DET

so I should sell a car with an extra motor and t3/t4 turbo setup for $3,500? i dont even want to sell it i just want trades
Old 11-09-2012 | 01:25 PM
  #6  
Srtwinkie's Avatar
Srtwinkie
Thread Starter
Registered Member
 
Joined: Aug 2009
Posts: 76
Likes: 0
From: Mechanicsville
Srtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these parts
Default Re: Greddy, Aeromotive,Signal, Garret, s13 SR20DET

everything is still there... in fact it more like two swaps just missing a crank and two rods for one of them so i dont count one of the swaps as a swap at all.... so in totale if you want to be technically its three cylider heads, crower 264 cams, OEM sr20det camstwo block, one crank, 6 pistons, 4 alternators, two starters it to much to name... i just want it all gone... its a goood truckload... i even have an extra clutch i dont want to outright sell it i just want a trade i cant afford to be without a car for longer then a day... UPDATE replacing a sensor that seems to be bad car should be back to running smooth again... but I mean if i put the turbonics t3/t4 on ther with the treadstone topmount then im sure $7,500 wont be an issue for a 375 whp, 350 fpt , 240sx on 12 psi...
Old 11-12-2012 | 02:15 PM
  #7  
Srtwinkie's Avatar
Srtwinkie
Thread Starter
Registered Member
 
Joined: Aug 2009
Posts: 76
Likes: 0
From: Mechanicsville
Srtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these parts
Default Re: Greddy, Aeromotive,Signal, Garret, s13 SR20DET

LOL the shell is in mint condition lol.... Probably in better shape then those koukie's
Old 11-12-2012 | 02:27 PM
  #8  
Srtwinkie's Avatar
Srtwinkie
Thread Starter
Registered Member
 
Joined: Aug 2009
Posts: 76
Likes: 0
From: Mechanicsville
Srtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these parts
Default Re: Greddy, Aeromotive,Signal, Garret, s13 SR20DET

Plus I Dont see extra motors and transmission being listed along with any of the things my car comes with... Good job! You get an A for being a Retard!
Old 11-13-2012 | 08:52 AM
  #9  
Srtwinkie's Avatar
Srtwinkie
Thread Starter
Registered Member
 
Joined: Aug 2009
Posts: 76
Likes: 0
From: Mechanicsville
Srtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these parts
Default Re: Greddy, Aeromotive,Signal, Garret, s13 SR20DET

If you know the cost of the items the price shouldn't matter. I'm using quality parts i didn't skip any corners.

Last edited by Srtwinkie; 11-13-2012 at 06:00 PM.
Old 11-13-2012 | 09:00 AM
  #10  
Srtwinkie's Avatar
Srtwinkie
Thread Starter
Registered Member
 
Joined: Aug 2009
Posts: 76
Likes: 0
From: Mechanicsville
Srtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these partsSrtwinkie is infamous around these parts
Default Re: Greddy, Aeromotive,Signal, Garret, s13 SR20DET

ther are so many thing that cost alot of money that i know i wont get back ive spent about $15K in this car... the sr20det are $1,800 this isnt a $400 honda motor


Quick Reply: Greddy, Aeromotive,Signal, Garret, s13 SR20DET



All times are GMT -8. The time now is 11:36 AM.