I was just wondering if a Hydro tranny will bolt right up to a motor that used to have a cable motor. If so what has to be done to the tranny to make it bolt on to it? Thanks in advance to anyone that helps me out.

 

yes they will bolt up no problem as long as you stay within the same motor families. ie...the d series trannies bolt up to each other. the b series trannies bolt up to each other , ect ect. get my drift? so no it does not matter if they are cable or hydraulic!

 

THE CLUTCH IS DIFFERENT UNLESS IT IS A 92-3 LS TRANNY

 

i want to bolt a 95 gsr tranny on to the motor and i was old by a technician that it would work

 

What type of motor are you talking about? What type of car will this be going into as well?

 

if the car wasnt originally equipped with a hydraulic clutch setup(for example), lets say you wanted to put that tranny into a 92 integra, then no, it wont work(unless you did a lot of work and converted it), but if its going into lets say a 94 and up integra, then you can put a non hydro motor up to a hydro tranny and it will be alright.....

 

The motor is a 91 ls motor but it is going to be put into a 92 hatchback which is already equipped with a hydo tranny. So in this case it should work correct? Thanks for the help

 

yes, that will work my frined, as long as the car came equipped with hyrdraulic clutch lines, witch the the 92 hatches did, then your fine brother..........

 

....as long as the tranny is off of a b series engine that is!

 

well he said he had a 95 gsr tranny, so im taking it he understood that part, but bro, im not to keen on the fact that you want to put a gsr tranny on a ls motor.....????.......