need alignment help
#1
2000 Xtreme
Thread Starter
Join Date: Apr 2003
Location: Newport News
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
need alignment help
ok so i lowered my truck with drop spindles yesterday, and now i can't find anybody that will do my alignment because my truck is too low. i was told that i need to find someone with an "alignment pit", does anyone know of a shop that has one in the 757 area or even VA, thanks
#2
The Pro to call.
Join Date: Jul 2003
Location: under cars.
Posts: 6,172
Likes: 0
Received 0 Likes
on
0 Posts
Re: need alignment help
how low is low?
i have fit cars with 2" clearance at the lip with no problem. takes some time to get it on the lift...but it could be done.
blacksburg though. and i dont work there anymore, i run my own shop. but it can be done.
i have fit cars with 2" clearance at the lip with no problem. takes some time to get it on the lift...but it could be done.
blacksburg though. and i dont work there anymore, i run my own shop. but it can be done.
#3
2000 Xtreme
Thread Starter
Join Date: Apr 2003
Location: Newport News
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Re: need alignment help
i think i have about 2....maybe 3 inch clearence, and i'm sure i could get it up on ramps if someone just took the time and used wood planks or something, but noone seems interested in helping
#4
To the future...
Join Date: Feb 2003
Location: Virginia Beach
Posts: 1,029
Likes: 0
Received 0 Likes
on
0 Posts
Re: need alignment help
hit noel up at the shop. he's got a friend in the tire business that takes car of us. get the info from him. the guy is in norfolk but i don't know exactly where. i wanna say around little creek or something.
#5
Registered member
Join Date: Sep 2003
Location: Oahu, HI
Posts: 4,781
Likes: 0
Received 0 Likes
on
0 Posts
Re: need alignment help
hot rod has an article this month on doing it yourself...didn't look like a lift is required, course i haven't read the article yet either. Hope this was a helpful post!
#6
Slow as Shit
Join Date: Jan 2003
Location: Short Pump
Posts: 10,172
Likes: 0
Received 0 Likes
on
0 Posts
Re: need alignment help
The shop can use some pieces of wood and place it at the foot of the ramp. That gives it the extra clearance it needs. I have done that before, just have to take your time thats all.
#7
2000 Xtreme
Thread Starter
Join Date: Apr 2003
Location: Newport News
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Re: need alignment help
i've thought about that, but i really don't think i have the ground clearance to even clear a boad, unless it is just barely angled upwards, but i would try.
Last edited by ThumpinS10; 10-20-2004 at 11:15 AM.
Thread
Thread Starter
Forum
Replies
Last Post