hey everyone i was wondering if it will make any difference in power if i use a h23a block with all the h23 internals with a h22a head on it or if i should just switch all the internals from a h22a block to a h23a block i cant use the h22a block cus it has a big chunk taken out of it. What should i do? Also i think i am pretty sure but if i did use the h23a block with all the internals it will bolt right up to the head right?

 

anyone know? bump

 

you cant use h23 internals on an h22 block or h22 internals in an h23 block.


and no, the h22 head will not bolt right up to the h23 block. there are some coolant issues i believe.

www.honda-tech.com do some research.

 

o ok well do u all know if you use just a regular h23a block with a h22a head if ther will be any difference in power if u used an all h22a motor

 

bump

 

searching helps...........
http://www.honda-tech.com/zerothread?id=510617

 

U can transfer the whole bottom end from the h22 block to the h23 no problem the casting is the exact same the only difference in it is the h22 has oil squirters and h23 does not.

 

And the head will bolt up all you have to do is take the oil orfice out of the block between cylinder 2 & 3