MIR Test and Tune Sunday anyone?
Thread Starter
Registered Member
Joined: Jan 2004
Posts: 1,124
Likes: 0
From: Norfolk, Va 757
All season tires on a FWD > Drag radials on RWD for the motha fuckin win
Registered Member
Joined: May 2007
Posts: 92
Likes: 0
From: Charlotte, NC
Hello Novian
Joined: Apr 2003
Posts: 1,259
Likes: 0
Re: MIR Test and Tune Sunday anyone?
So lets compare...you ran a 12.7 at 111mph with the following mods:
355 LT1 built by Tysons Machine (I have all the reciepts, close to $5000 including the headers)
Mahle Forged Pistons 11.5:1
Scat Forged Rods
Stock Crank turned
Melling 10554 Oil Pump (Std vol)
Stock Heads
CC503 cam (224/230)
Comp 918 Beehive Springs
Comp locks, retainers, etc.
Comp Pro Mag 1.6 Rockers
Exhaust:
Pacesetter Emissions Legal Longtubes
Pacesetter Y-Pipe
No Cat (I have a 3" Catco Cat I will give you with the car if you want it)
Hooker Catback
Transmission:
Ram Clutch (1 step above stock)
Pro 5.0 shifter
Black Z28 shift ball
Harlan Shift Light
While my car has half the cylinders of your car with a hell of alot less displacement and engine work(let me remind you intake/exhaust/header is not engine work at all). I manage to pull a 14.0 at 101mph, so you ran 1.3sec faster than mine time and 10mph more with a BUILT engine.. WOW
355 LT1 built by Tysons Machine (I have all the reciepts, close to $5000 including the headers)
Mahle Forged Pistons 11.5:1
Scat Forged Rods
Stock Crank turned
Melling 10554 Oil Pump (Std vol)
Stock Heads
CC503 cam (224/230)
Comp 918 Beehive Springs
Comp locks, retainers, etc.
Comp Pro Mag 1.6 Rockers
Exhaust:
Pacesetter Emissions Legal Longtubes
Pacesetter Y-Pipe
No Cat (I have a 3" Catco Cat I will give you with the car if you want it)
Hooker Catback
Transmission:
Ram Clutch (1 step above stock)
Pro 5.0 shifter
Black Z28 shift ball
Harlan Shift Light
While my car has half the cylinders of your car with a hell of alot less displacement and engine work(let me remind you intake/exhaust/header is not engine work at all). I manage to pull a 14.0 at 101mph, so you ran 1.3sec faster than mine time and 10mph more with a BUILT engine.. WOW
What time did you run? 14.0 @101??
Registered Member
Joined: May 2007
Posts: 69
Likes: 0
Re: MIR Test and Tune Sunday anyone?
Hello Novian
Joined: Apr 2003
Posts: 1,259
Likes: 0
Re: MIR Test and Tune Sunday anyone?
Hahahaha I ran that exact same time on street tires too! LOL but im not built! Thats why i was like how the hell did they find that out? I didnt even post that up hahahahahahahahaha
Registered Member
Joined: May 2007
Posts: 92
Likes: 0
From: Charlotte, NC
Re: MIR Test and Tune Sunday anyone?
Registered Member
Joined: May 2007
Posts: 69
Likes: 0
Registered Member
Joined: May 2007
Posts: 92
Likes: 0
From: Charlotte, NC
Hello Novian
Joined: Apr 2003
Posts: 1,259
Likes: 0
Re: MIR Test and Tune Sunday anyone?
Best on slicks i could pull was 12.51@108.8 with a shitty 1.8 60ft. Basically 12.4@109 lol.
The higher trap on street tires is because well... it is just that street tires! So they spin so much that it caused me to get a higher trap! Plus i think something is wrong iwth my tune, i should be in 12.0@111 range with a better 1.6.
You wanna run for fun?
You'd probably eat me though. Built like that you should put a whoopin' on me!
