Just to point out, I have the old 94 stock (no lift S or B) and run 32 10.5's-16 and have no rubbing issues.

 

i believe you might have torsion bars that you can crank up a little bit for a little extra clearance.

 

so 33's will work just dont go bigger than 12.5 or 12.5 is to wide?

 

i have a 95.5 tacoma with 3in body lift( not by choice) 33x12.50 15in tires and they rub pretty damn bad. 31x10.50s even rubbed in reverse

 

no torsion bars on those truck, they are just older and have a different suspension/fenderwell/brakes, the thing is he's runnin 10.5 wide tire's......

 

if you have 15inch rims, go with 10.5 wide tire, looks like a pizza cutter but not to bad, you schouldnt have any rubbing, 16inch rims and go with 285/75r16 or 255/85r16, the 285 is around 33inches tall and about 11.3 inches wide depending on the tires, the 255's are like 33.4 inches tall and about 10 inches wide, bfg m/t's and trxxus m/t's are the only tires i know of that come in that size..........

 

its prob something to do with the backspacing or offset on your rims, its understandable to have the 12.5's rub, 10.5's somewhat......are you running stock rims?????????

 

there anything i can get to get a fatter tire

 

3 more inches of lift via "body"

 

thats what i was thinking..... my wallets gonna hate me.. how much you think a 3" body and 3 inch coil willc ost to install