Righty tighty, lefty loosey?

 

someone drive up there and get it off for the poor kid

 

I had one, screwdriver trick through the middle would not take off. End up using a chisel and hammer on the edge of the oil filter, it eventually gave way.

 

hahaha,blah's "quote of the day"

 

i usually crush the old oil filter on there and it just grips after that. just keep trying to twist it off. it'll eventually budge. patience. longest it ever took me to take it off a crx was about 1 hour. but it eventually came off.

 

Go watch some McGiver episodes and something will come up...

I had that problem once and I just grabbed my old oem blower belt and just wrapped it around the filter once with the groves in and loosen it up.

 

hey man sometime people over tighten them one thing u can try that i have had to do at work is take a screw driver and then use a hammer and tap the screw driver threw the filter then use the screwdriver to help turn it that usually helps out and be sure to have a drain bucket cuz one the screwdriver punctures it it gunna leak but it helps release some pressure to

 

http://www.sears.com/shc/s/p_10153_1...0070921x00003k

Stick it on a 3/8" ratchet and get it done. If that doesn't work for you, then you suck.

 

I'm thinking on trying that tomorrow

If all else fails with the screwdriver trick, I'll get myself on of those handy little attachments. Thanks for that link, never seen anything like it.

 

Finally! I got the oil filter off by driving a screwdriver through it and turning. Had to do it three times to get it loose. Looks like I took a 22 to it. Haha. Thanks for everyone's help. Here are some pictures to enjoy...