b18b head on b20 bottom end, better then b20 head?
Project in the makin
Joined: Apr 2004
Posts: 301
Likes: 0
From: hampton
Re: b18b head on b20 bottom end, better then b20 head?
i heard the head that comes on the b20 don't flow very well. and that is why a lot of people that do the b20 swap either put a 1.6 head or a 1.8 head
Registered Member
Joined: Jul 2003
Posts: 1,054
Likes: 0
From: Philly
Re: b18b head on b20 bottom end, better then b20 head?
Originally Posted by HondaCRXsiHatch
i heard the head that comes on the b20 don't flow very well. and that is why a lot of people that do the b20 swap either put a 1.6 head or a 1.8 head
Huntin Dropa ForLife
Joined: Dec 2002
Posts: 8,735
Likes: 0
From: Virginia Beach, VA
Re: b18b head on b20 bottom end, better then b20 head?
USDM b20 heads are the same as USDM LS heads.
JDM B20 heads, for the most part, are the same as USDM LS heads
RARE JDM B20 Heads (casting # P8R) are different. chambers are 84mm, intake valves are 33m (same as Bseries Vtec), and i believe the ports are shaped a bit more like a vtec head.
JDM B20 heads, for the most part, are the same as USDM LS heads
RARE JDM B20 Heads (casting # P8R) are different. chambers are 84mm, intake valves are 33m (same as Bseries Vtec), and i believe the ports are shaped a bit more like a vtec head.
Thread Starter
Team Ultraspeed
Joined: Jul 2003
Posts: 723
Likes: 0
From: chesapeake
Re: b18b head on b20 bottom end, better then b20 head?
Originally Posted by sucka306
USDM b20 heads are the same as USDM LS heads.
JDM B20 heads, for the most part, are the same as USDM LS heads
RARE JDM B20 Heads (casting # P8R) are different. chambers are 84mm, intake valves are 33m (same as Bseries Vtec), and i believe the ports are shaped a bit more like a vtec head.
JDM B20 heads, for the most part, are the same as USDM LS heads
RARE JDM B20 Heads (casting # P8R) are different. chambers are 84mm, intake valves are 33m (same as Bseries Vtec), and i believe the ports are shaped a bit more like a vtec head.
JAY SPEC
Joined: Sep 2003
Posts: 3,170
Likes: 0
From: Chesapeake/ODU
Re: b18b head on b20 bottom end, better then b20 head?
Originally Posted by sucka306
USDM b20 heads are the same as USDM LS heads.
JDM B20 heads, for the most part, are the same as USDM LS heads
RARE JDM B20 Heads (casting # P8R) are different. chambers are 84mm, intake valves are 33m (same as Bseries Vtec), and i believe the ports are shaped a bit more like a vtec head.
JDM B20 heads, for the most part, are the same as USDM LS heads
RARE JDM B20 Heads (casting # P8R) are different. chambers are 84mm, intake valves are 33m (same as Bseries Vtec), and i believe the ports are shaped a bit more like a vtec head.
Huntin Dropa ForLife
Joined: Dec 2002
Posts: 8,735
Likes: 0
From: Virginia Beach, VA
