ok i just got a b20b and its missing a few parts but my main ? is will a ls dizzy work or will i need to get a b20 dizzy?

 

i think they are the same. not sure. but you should get on a parts place online and part number match and see.

 

i cant really remember of the top of my head i think it will work tho . tho only diff i think there is , is the diff between vtec and non vtec

 

?

 

This made no sense. The B20 and the LS are both Non-Vtec. If it is a JDM B20 then the distributor will be an OBD2 unit and will have a different part number. If you happen to have a LS Distributor try it. If it will bolt up to the head correctly meaning that you can put in all three bolts then it should work. If you happen to have the Casing from the B20 then you can swap the guts from a different Distributor. Please let us know what you are missing (need more detail).

 

uhh it should work but i think one is od2 and one is obd1 best bet is get a del sol distributor from a 91-95 dOHC, you can still do it with the b20 but you just need to cut the wires and put in the obd1 wires thats if your running obd1 and not obd2 ok

 

missing parts are... dizzy, and motor mounts

 

is it going in a 92 car? what harness do you have? if you are putting it in a 92 si you can use your stock sohc vtec harness and leave the vtec unplugged and get a obd 1 ls dizzy and it will work.

 

cool deal yes its going in a 92 si eg hatch...

 

thats what i had when i had my ls swap was the stock sohc vtec harness and the vtec wires were unplugged and had tape over them. everything should reach. just do a ls/vtec or b20/vtec and be done with it........