ttt

 

up

 

I've got one in my garage. Come pick it up for $75. PM if you are interested. I've also got a set of Spark Racing 84.5mm ITR style B20 pistons with rings that will give you 11.5 - 11.8 c/r depending if you are using a B16 or GSR head. I'd let them go for $250.

 

^^^^^
PM sent

 

ttt

 

up

 

Are you sleeving the block? I have heard bad things about going 84.5 on the stock b20 sleeves cause there is not enough surface area in the top of the sleeves between cylinders to seal the head gasket as well as normal.

Also, if you are sleeving the block you can use any b series block you want, and I happen to have a b18b1 block that needs cut. Selling for $50.

 

Thanks for the info, but I was running an 84.5 set up until the valve introduced itself to the piston and decided that it was love at first touch. Head and block were decked and milled too much. The block was not sleeved and thats why I am looking for another B20 that I can bore to 84.5. This is an all motor set up that previously ran 8.4 @85 in the 1/8 with stock GSR cams. Looking to go with same set up but type r or skunk 2 cams this time.

 

Gotcha. What compression where you running?

 

ttt