Soo im lookin into a new set of wheels for my 92 Civic SI. So i have 2 options..

1. I found a set that are staggered 15x7 with +15 in the front and 15x8 with 0 offset in the rear. Now my question is what tires would I put on these and will it poke a little to much. Im going to take a wild guess and say they are going to poke to much for my liking. Your input is needed!!

2. I found a set of 15x8s all the way around with either a +20, +25, or a +30. Again these are going on my civic hatch. I dont want alot of stretch and if i can get away with it, i want a pretty fat tire on these wheels. Maybe a 225/50. Your input is needed here too!


Thanks for ur time! Now help a ***** out!

 

not a chance on the 225.

195 is more like it

195/45 actually, unless you wanna run mexi-poke

15x8+32 on my car with 215/40 has 2 mm of space in the front without a camber kit. rear has camber correction and has less than 1mm of space

 

Id rather have traction than a stretch. My front fenders are pretty rolled. My fronts also have a 5mm spacer. So they are +35 offset with plenty of room for a bigger tire/wider rim.

 

my fenders are rolled flat and have ~2mm pull in the front

 

Pics?

 

I would go with this, will be a little stretch and will look nice.

 

Get 16s, run a 215/45. Get the +25 up front and +20 out back.


Also, you can't have "pretty rolled" fenders. You can have fenders that have been rolled, and fenders that have been attempted to be rolled, lol.

 

and induce camber, aka buy kits and add camber.

my setup is with factory upper control arms

 

No atempt here. They have been roll flat.

I dont want 16's, i wanna stick with 15's.

 

TTT!