Im looking to unload my turbo stuff since im having engine issues again ... ill end up parting the whole car if i can sell my turbo setup.

So heres the good stuff.

Tempest build ram horn manifold , t3 flange
Tial 38mm wastegate
Garret/precision gt35 ball bearing turbo w oil restrictor
3in 4 bolt downpipe .... v band under car ...which connects to 3 inch mandrel bent pipe back to a strait thru style muffler, came off a porsche.
Big turbo xs intercooler
All charge piping , couplers and clamps...would reccomend t bolt clamps.
Greddy blow off valve
precision 750cc injectors ...no resistor box needed .
All oil/water lines for the turbo are braided
will come with oil pan that has drain bung welded on.
walbro 255 intake pump
will enclude endyne catch can set up'
Also comes with boost solenoid..... for boost by gear and what not.

All this stuff is very nice .... bolts right inplace and works amazing.
Made 407 hp on 13lbs on my stock motor

I will sell my s300/p72 comp for an extra $500 with the tune that made the above hp and a lower hp setting.

I will get more elaborate pics of any and all parts .... or whatever u request to see.

IM looking to get $2800 with the s300.

Without the s300 Id like $2300

NO TRADES >>.. if i get rid of this im getting out of the game.

stuff is located in souther md ..... i will work on more in depth pics tommorow

 

damn 407 on 13psi, what motor is that?.. would you part out?

 

it was kinda ghetto ... which might be why its broke now lol .

It was an ls block with all stock gsr internals and a gsr head.

Ill only part if i can find a buyer for all parts if not looks like my tax money will be buying pistons and rods .

thanks for the interest.

 

bump .... id like to sell complete....unless i can find buyers for everything.

 

oil catch can will u part and how much

 

[QUOTE=brian15;6122539]Im looking to unload my turbo stuff since im having engine issues again ... ill end up parting the whole car if i can sell my turbo setup.

So heres the good stuff.

Tempest build ram horn manifold , t3 flange
Tial 38mm wastegate
Garret/precision gt35 ball bearing turbo w oil restrictor
3in 4 bolt downpipe .... v band under car ...which connects to 3 inch mandrel bent pipe back to a strait thru style muffler, came off a porsche.
Big turbo xs intercooler
All charge piping , couplers and clamps...would reccomend t bolt clamps.
Greddy blow off valve
precision 750cc injectors ...no resistor box needed .
All oil/water lines for the turbo are braided
will come with oil pan that has drain bung welded on.
walbro 255 intake pump
will enclude endyne catch can set up'
Also comes with boost solenoid..... for boost by gear and what not.

price on everything but muffler,750 injectors,oil pan,walbro 255 fuel pump lmk i dont need these things pm me thanks