wrapped header, lights, em1 muffler, eg master cyl/booster CHEAP
whats up guys, names john, i reside in stafford va, all parts are located in old town alexandria va. if interested, shoot me a text at 571 218 8895

eg headlights no broken mounts, one side marker tab is busted and the case is cracked, 20 bucks for both
chikara header wrapped, no lower half, good shape for 20 bucks
EM1(2000 SI) muffler, been cut off, no hanger bracket, but can be welded up to work my exhaust shop for 20 bucks
eg master cyl(13/16) and booster(thin one) for 20 bucks
D-series shift linkage in good shape, needs a good cleaning! 20 bucks
ill take trades or whatever, this stuff is just taking up space next to my tool box, i need it gone.

eg headlights no broken mounts, one side marker tab is busted and the case is cracked, 20 bucks for both
chikara header wrapped, no lower half, good shape for 20 bucks
EM1(2000 SI) muffler, been cut off, no hanger bracket, but can be welded up to work my exhaust shop for 20 bucks
eg master cyl(13/16) and booster(thin one) for 20 bucks
D-series shift linkage in good shape, needs a good cleaning! 20 bucks
ill take trades or whatever, this stuff is just taking up space next to my tool box, i need it gone.
Last edited by g230sport; Oct 8, 2010 at 10:35 AM.
thanks for the interest!
but the muffler would need hangers made up, and it would weld up to your stock axle back piping, its basically just a 92-2000 si/ex muffler, and to clarify, its just the muffler
but the muffler would need hangers made up, and it would weld up to your stock axle back piping, its basically just a 92-2000 si/ex muffler, and to clarify, its just the muffler
ok... sorry, i don't mean to be a broken record, it's just that the wording above is very strange... are you saying you own an exhaust shop and you will weld the hangers on for 20 bucks? if so how much is the muffler? or is the muffler 20 bucks with the hangers welded on by your shop? or is that "my exhaust shop" bit a typo? --and therefore the muffler, as is (no hangers), is 20 bucks?
sorry man, the muffler, as is, with no hangers for 20 bucks, you then would need to either weld everything up yourself, or take it to an exhaust shop.
sorry, that was a typo dude
bump
sorry, that was a typo dude
bump
Thread
Thread Starter
Forum
Replies
Last Post








