Post a pic of your offroader/4x4.
per your request. (my hood wont shut due to new thicker radiator and e-fan with the old stock intake sits to high cause of it. it does 'lock' but doesnt go all the way down) (grille, wheel wells are missing cause im bedlining them, along with all the black trim)








lol 
bungee cord is to keep my intake from rubbing on my alternator pulley. due to the fitment issues i mentioned above.
zipties are for the air filter on my pcv. the things huge! i had no where else to put it lol. so i hung it on the brake booster vac line lol
i think i installed it last weekend(not easter one) and this is what i drained from it today

its a mix of coolant and oil mostly. coolant is from my fuck up with the plugs inside the heads.
i plan on adding 2 more oil coolers to the front also, and eventually e-fans on the 2 shown(tranny)

bungee cord is to keep my intake from rubbing on my alternator pulley. due to the fitment issues i mentioned above.
zipties are for the air filter on my pcv. the things huge! i had no where else to put it lol. so i hung it on the brake booster vac line lol
i think i installed it last weekend(not easter one) and this is what i drained from it today

its a mix of coolant and oil mostly. coolant is from my fuck up with the plugs inside the heads.
i plan on adding 2 more oil coolers to the front also, and eventually e-fans on the 2 shown(tranny)
license plate : MUD 2MCH

did you see me? or rather hear me? i guned it when i thought it mightve been you lol
this was the area where the apartments with the white fence thats around them. is when i saw you
this was the area where the apartments with the white fence thats around them. is when i saw you
Last edited by irfreddy; Apr 26, 2011 at 06:51 AM.
Anyone have any use for a full sized spare from a ZR2 Blazer? I don't think it's ever seen the ground, other than the ground it's been sitting on since mine was totalled last year. I'm not sure what the bolt pattern is on those off of the top of my head, but if you want it, get it before I scrap it!
Few weeks ago behind the house


Didn't like the wheel backspacing on the D Windows so I got a set of Soft 8's from a buddy and mounted the Trxus on them. I like it a lot better now. Of course this is like my 5th wheel setup since I've owned the Jeep.
Then put the hardtop back on, went down to Madison thinking I was trading my hardtop for a rubicon transfer case and a 5spd transmission. Find out the guy doesn't check his parts very well and was trying to trade a normal 231J transfer case. So needless to say I drove back home empty handed. So the next pics are right after the flooding with the hardtop on.


Softop is back on. Just ordered new Skyjacker Nitro shocks. Put the hardtop on my 2003 TJ Project in the garage.

The Black TJ has a 79 Ford HP Dana 60 Front and a Dana 70 rear under her. Slowly going to start building suspension and running 40in tires.


Didn't like the wheel backspacing on the D Windows so I got a set of Soft 8's from a buddy and mounted the Trxus on them. I like it a lot better now. Of course this is like my 5th wheel setup since I've owned the Jeep.
Then put the hardtop back on, went down to Madison thinking I was trading my hardtop for a rubicon transfer case and a 5spd transmission. Find out the guy doesn't check his parts very well and was trying to trade a normal 231J transfer case. So needless to say I drove back home empty handed. So the next pics are right after the flooding with the hardtop on.


Softop is back on. Just ordered new Skyjacker Nitro shocks. Put the hardtop on my 2003 TJ Project in the garage.

The Black TJ has a 79 Ford HP Dana 60 Front and a Dana 70 rear under her. Slowly going to start building suspension and running 40in tires.





