Honda Ruckus / Scooter Thread
I would say this if you have the cash flow, and if you are 160 and under. The travel on the RRGS is short by comparison. I can only imagine the bottom outs. Those forks also limit your fender options because the mounting/strapping point is lower. It does look dope though.
The brembo will fit the NCY kit BTW..... with the right mount plate of course. I will fill you guys in after I get a few rides in on it.
The brembo will fit the NCY kit BTW..... with the right mount plate of course. I will fill you guys in after I get a few rides in on it.
^^ lol
Just cut all the tape off my harness to get a partial wire tuck going... it's amazing how much water is in there. Stinky musty water.
Just cut all the tape off my harness to get a partial wire tuck going... it's amazing how much water is in there. Stinky musty water.
yup thats what i did.
Someone wanna tell me which color wire goes on which side of the ignition coil? The service manual doesn't say. I did right it down but I lost the paper that had it all written down on 
Green wire to the green side of the coil, black/yellow stripe wire to the black side?

Green wire to the green side of the coil, black/yellow stripe wire to the black side?
thx. i think only because pic sucks/is from far. kinda ghetto modded and i probably paid more than i should have -.- bought it from a youngin in SE NC, the pic of the station is also in podunk NC, near cherry point.
me n the ruck just got drenched for the first time. what a bonding exp. was kinda scared the uni air filter was just going to let it suck water straight in. !@$%&#$ popos on base keep hasslin me about it trying to grill me about my illegal 'pocket/mini bike'. I says- 'nope 49cc scooter'. unlike the big boys on two, i dont have to live with boots and long sleeves in this heat either.. cant wait till my half helmet comes in
!@$%&#$ popos on base keep hasslin me about it trying to grill me about my illegal 'pocket/mini bike'. I says- 'nope 49cc scooter'. unlike the big boys on two, i dont have to live with boots and long sleeves in this heat either.. cant wait till my half helmet comes in 

It's because they think your cute
Thanks for the help BTW.
Got a lot accomplished: Harness is all connected and tightened up at the engine, modded the intake (short one small filter), re-jetted the carb to 80 (main), relocated PCV to top of carb, coolant reservoir/fuel pump/filter/tank is on and hosed-in the harness, throttle + brake cable routed, chipped my paint with vise grips, and god knows what else.
My goal is to be RUNNING by the end of the weekend, ride-able when my bars get here.
Thanks for the help BTW.Got a lot accomplished: Harness is all connected and tightened up at the engine, modded the intake (short one small filter), re-jetted the carb to 80 (main), relocated PCV to top of carb, coolant reservoir/fuel pump/filter/tank is on and hosed-in the harness, throttle + brake cable routed, chipped my paint with vise grips, and god knows what else.
My goal is to be RUNNING by the end of the weekend, ride-able when my bars get here.
Last edited by FObangah; Aug 18, 2011 at 11:04 AM.





