Notices
Tech Talk Anything technically related to your vehicle should be posted here. If you're looking to have work done, try one of the Regional Forums.

Question about offset

Thread Tools
 
Old Jan 10, 2008 | 07:25 AM
  #11  
buugiewuugie's Avatar
buugiewuugie
Thread Starter
Zombies found Waldo
 
Joined: Mar 2006
Posts: 5,955
Likes: 0
From: P-town
buugiewuugie buugiewuugie buugiewuugie buugiewuugie buugiewuugie buugiewuugie buugiewuugie buugiewuugie buugiewuugie buugiewuugie buugiewuugie
Default Re: Question about offset

Originally Posted by WishIHadaSilvia
^^^ LOL


What suspension are you planning on using? Don't go smaller then 16s, 17s would be better. What wheels are you looking at? There are some good deals on Enkei RPF1s on Zilvia.net in any size, in low offsets (just pick the smallest number you can).

If you're looking more for cheap ass wheels then just get the sportmax 16X8 +0 or +15. Run a 205/45 or 195/50 on them. If you have a little more money you can get some Rota P45Rs in 17X9 and 18X9.5 in the lowest offsets possible, run a 215/45 up front and 235/40 in the rear. I think those only come in a +25 or +30 offset, the 17X9 needs to be around a +10 offset on a S13 (so if it is a +30 get 20mm spacers), and the 18X9.5 can be a +15 on a S13 so if it's +30 get 15mm spacers. You'll have to roll and pull the fenders a tad, and run some negative camber.

That type of fitment will look completely retarded on a car with stock suspension. Hit 240Trainee (not sure if that's spelled right) up on here and order some coilovers first.
Ok so I shouldn't get the wheel before suspension? I don't have any plans for suspension, but i am not really looking to get real elaborate on the suspension maybe just lower it. but I don't know, what do you think I should do?

So a +15 offset is perfect for a 240 then?
Old Jan 10, 2008 | 07:47 AM
  #12  
WishIHadaSilvia's Avatar
WishIHadaSilvia
I Roll Fenders
 
Joined: Jan 2005
Posts: 7,083
Likes: 0
From: Chesapeake
WishIHadaSilvia WishIHadaSilvia WishIHadaSilvia WishIHadaSilvia WishIHadaSilvia WishIHadaSilvia WishIHadaSilvia WishIHadaSilvia WishIHadaSilvia WishIHadaSilvia WishIHadaSilvia
Default Re: Question about offset

The offset you need is dependent on the width of the rim.

Get Coilovers, then buy wheels.

This is how bad they look when the car is not low enough:



These are different sportmax wheels, with spacers to fit right...the car is also low enough.



He used 10mm spacers on the sport max wheels, making them +25, I'd say get a 15mm spacers to make them +20.


Getting only lowering springs with wheels this aggressive will look like total ass.


If you want more examples of different wheels on different cars, in different widths, diameters, and offsets check out this thread:

http://www.zilvia.net/f/showthread.php?t=129865

They also post tire sizes, it is really helpful to get an idea of what you'd need to do to your car to make it look the way you want it to.

Last edited by WishIHadaSilvia; Jan 10, 2008 at 07:49 AM.
Old Jan 10, 2008 | 07:59 AM
  #13  
buugiewuugie's Avatar
buugiewuugie
Thread Starter
Zombies found Waldo
 
Joined: Mar 2006
Posts: 5,955
Likes: 0
From: P-town
buugiewuugie buugiewuugie buugiewuugie buugiewuugie buugiewuugie buugiewuugie buugiewuugie buugiewuugie buugiewuugie buugiewuugie buugiewuugie
Default Re: Question about offset

thanks for you help man. That second one i think looks bad ass. If I have any more questions is it cool if I PM you?
Old Jan 10, 2008 | 09:26 AM
  #14  
WishIHadaSilvia's Avatar
WishIHadaSilvia
I Roll Fenders
 
Joined: Jan 2005
Posts: 7,083
Likes: 0
From: Chesapeake
WishIHadaSilvia WishIHadaSilvia WishIHadaSilvia WishIHadaSilvia WishIHadaSilvia WishIHadaSilvia WishIHadaSilvia WishIHadaSilvia WishIHadaSilvia WishIHadaSilvia WishIHadaSilvia
Default Re: Question about offset

Yeah that's fine, you can PM me.

That second car is a guy on here, his name is UpSlideDown, so you can look up his posts with pictures and stuff, he knows more then me about fitment.
Old Jan 11, 2008 | 05:58 PM
  #15  
NX2KDET's Avatar
NX2KDET
Needs a fast car now
 
Joined: Apr 2005
Posts: 4,287
Likes: 0
From: Dumfries,VA
NX2KDET NX2KDET NX2KDET NX2KDET NX2KDET NX2KDET NX2KDET NX2KDET NX2KDET NX2KDET NX2KDET
Default Re: Question about offset

Originally Posted by WishIHadaSilvia
I assume you're kidding, but if you aren't post pictures, I've seen 19X10.5 -5 but not 12s.

Old Jan 15, 2008 | 10:47 AM
  #16  
alvin's Avatar
alvin
Banned
 
Joined: Nov 2007
Posts: 12
Likes: 0
From: virginia beach
alvin is an unknown quantity at this point
Default Re: Question about offset

offset if everything. . if your car is stock. i would worry about suspension first, if you want to get crazy offset rim i would get coilovers then worry about what rims next. for show or go?

Last edited by alvin; Jan 15, 2008 at 10:50 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
coup3y
Tech Talk
16
Dec 16, 2008 02:16 PM
boomer0587
NOVA/DC/MD
1
Mar 9, 2006 05:08 AM
spike
Automotive Discussion
4
Dec 29, 2003 06:17 PM
SCOOBY STEVE
Tech Talk
8
Aug 14, 2003 05:35 PM
TPJ
Tech Talk
3
Mar 5, 2003 01:48 PM




All times are GMT -8. The time now is 04:01 PM.