firing order and firing problem

Reply Subscribe

Thread Tools

11-24-2010, 04:22 AM

#21

streetmagic808

Registered Member

Thread Starter

Join Date: Jan 2007

Location: richmond / chesterfield

Posts: 219

Likes: 0

Received 0 Likes on 0 Posts

Re: firing order and firing problem

Quote:

Originally Posted by Fabrik8

Ok, so you're doing an absolute shit job of describing what's going on here then. I thought you didn't have spark, so do you actually have spark or not? If you have spark, why are you replacing the ignition modules? Describe EXACTLY what the problem actually is.

Ok my motor was turning over and running then a buddy of mine cleaned my IAC valve after he did that it wouldn't fire. Then my dads friend said it might be the ignition module so i got it tested it passed so i put it back in the dizzy. So thats when i pulled the spark plugs out to see if they were getting spark which ALL of them have spark to them. Now my motor is still turning over BUT still NOT firing.

11-29-2010, 05:01 AM

#22

ekhatchy

Registered Member

Join Date: Aug 2010

Posts: 517

Likes: 0

Received 0 Likes on 0 Posts

Re: firing order and firing problem

find someone with a spare distributer and try it i had the same problem i used ether and it ran but when it heated up it died changed the modules still nothin swapped the dizzy started up fine somewhere i think a solder broke and as it heated up i think the gap expanded not saying its the same thing but it will eliminate the dizzy out of the problem