My first bike project
Ok so i need to clean my neck stem bearings replace my clutch cable and lever and check the balance in my tires. i need to do something with the swingarm too not sure if it is clean out the old grease and put new grease or clean the bearings cant remember what he said.
Last edited by Kells<3's Bikes; Jan 10, 2008 at 09:07 AM.
Ok so i need to clean my neck stem bearings replace my clutch cable and lever and check the balance in my tires. i need to do something with the swingarm too not sure if it is clean out the old grease and put new grease or clean the bearings cant remember what he said.
HAHAH... hey what time u guys stayin open today?... i might ride over
Ok so i need to clean my neck stem bearings replace my clutch cable and lever and check the balance in my tires. i need to do something with the swingarm too not sure if it is clean out the old grease and put new grease or clean the bearings cant remember what he said.
there's no bearings in that swingarm, unless someone did some upgrades at some point. stock, they're just bushings.

it's got cb550 shocks on it, they're a bit stiffer sprung (and longer) than the stock 350 shocks.
but yeah, some new bushings/ bearings wouldn't be a bad idea, the bike IS older than dirt.
Shane had her on the highway and thinks he had her up to 80 ( speedo is not accurate after 60-65) and that was it! But I dont htink i will be nneding to go that fast anytime soon. Higher speeds to me right now are/is 65 and above





She is a little (not sure of the tech term) bouncey and wobbles at higher speeds