ok, im doing a swap on my ek hatch, im wanting to know, what t bracket to use for the back motor mount, ive been told to use a del sol vtec bracket, but ive also been told that a 94 and up integra bracket is the same, just wanting to clear this up before the swap, thanks in advance

 

you're going need the t bracket from a civic si... idk if a delsol is the same...
also the drivers side engine bracket....

 

you need the rear T bracket from a 99-00 honda civic si, the driverside motor mount bracket that bolts to the block with the 2 studs that hold the mount from a 99-00 honda civic si.

those are the only brackets you need to change and that is the only car they will work from.

also use your stock sohc passenger side tranny mount and bracket and of course you need bseries torque mounts.

inorder to keep a/c you need a 97 crv have bracket (cheaper) or a 94+ del sol vtec a/c bracket.

 

ok thanks

 

We did a B-series swap into my 99 hatch and these guys are right, but unfortunately the Del Sol vtec bracket didn't work for my AC, so I guess I'm gonna try a CRV bracket.

 

thanks guys for all your comments and time