Notices
Tech Talk Anything technically related to your vehicle should be posted here. If you're looking to have work done, try one of the Regional Forums.

obd0 b16 misfire

Thread Tools
 
Old Feb 2, 2009 | 06:20 AM
  #1  
screamneagle's Avatar
screamneagle
Thread Starter
AWD4G63
 
Joined: Oct 2005
Posts: 916
Likes: 0
From: Charlottesville
screamneagle has disabled reputation
Default obd0 b16 misfire

OK so i have a b16 in my 90 crx hf.. I cant seem to find whats causing the misfire. Ive changed Fuel filter, Plugs, WIres, Cap,Rotor, Ecus, and Dizzy. I have msd on the car and have wired it up withought the msd box straight to the blaster coil. The coil is the only thing i have not changed . It misses with or withought the msd box, so i have ruled that out. Im gonna change the cap tomorow to retain the internal coil.to see if that works. LMK if u all have any info.
thanks
Old Feb 2, 2009 | 06:31 AM
  #2  
screamneagle's Avatar
screamneagle
Thread Starter
AWD4G63
 
Joined: Oct 2005
Posts: 916
Likes: 0
From: Charlottesville
screamneagle has disabled reputation
Default Re: obd0 b16 misfire

forgot to say car does not miss at idle only under a throttle.. No cel and no ecu codes flashing either.
Old Feb 2, 2009 | 07:36 PM
  #3  
91LSDA9's Avatar
91LSDA9
Registered member
 
Joined: Oct 2008
Posts: 286
Likes: 0
From: Virginia, Virginia
91LSDA9 has disabled reputation
Default Re: obd0 b16 misfire

check compression
Old Feb 2, 2009 | 09:39 PM
  #4  
Hatch Man(GsR)'s Avatar
Hatch Man(GsR)
I drive a coupe
 
Joined: Feb 2004
Posts: 762
Likes: 0
From: Virginia Beach
Hatch Man(GsR) Hatch Man(GsR) Hatch Man(GsR) Hatch Man(GsR) Hatch Man(GsR) Hatch Man(GsR) Hatch Man(GsR) Hatch Man(GsR) Hatch Man(GsR) Hatch Man(GsR) Hatch Man(GsR)
Default Re: obd0 b16 misfire

Originally Posted by 91LSDA9
check compression
x2
Old Feb 3, 2009 | 06:07 AM
  #5  
screamneagle's Avatar
screamneagle
Thread Starter
AWD4G63
 
Joined: Oct 2005
Posts: 916
Likes: 0
From: Charlottesville
screamneagle has disabled reputation
Default Re: obd0 b16 misfire

compression check checked good on every cylinder..175 across. I drove the car last night and it cut off and would not start back for avout 5 min. Ecu was flashing code 5 which is map sensor. Im gonna replace it tonight and hope for the best
Old Feb 3, 2009 | 10:08 AM
  #6  
jfish360's Avatar
jfish360
Love to Crx
 
Joined: Jul 2006
Posts: 311
Likes: 0
From: Richmond
jfish360 is an unknown quantity at this point
Default Re: obd0 b16 misfire

Why do you have msd ignition.

Stock is just as good and more reliable.
Old Feb 3, 2009 | 12:14 PM
  #7  
screamneagle's Avatar
screamneagle
Thread Starter
AWD4G63
 
Joined: Oct 2005
Posts: 916
Likes: 0
From: Charlottesville
screamneagle has disabled reputation
Default Re: obd0 b16 misfire

ya i know.. im getting a cap tonight to get the internal coil and reg setup back. I bought the car and it had msd on it already.
Old Feb 4, 2009 | 04:17 AM
  #8  
screamneagle's Avatar
screamneagle
Thread Starter
AWD4G63
 
Joined: Oct 2005
Posts: 916
Likes: 0
From: Charlottesville
screamneagle has disabled reputation
Default Re: obd0 b16 misfire

I Changed the map sensor and did another compression check to make sure the guage was reading correctly and its still doin it. Im putting the coil in tonight to see if it makes a diffrence.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post




All times are GMT -8. The time now is 10:14 PM.