so when i put my turn signal on left or right they both come on but only in the front what does that mean? wires crossed maybe?

 

possibly? have you recenty changed any bulbs?

That, or possibly you have some bulb(s) out

 

changed some like last year

 

your rear bulbs are out, it blinks faster to let you know.

I don't think your wires are crossed cause that would affect your front blinkers too if I'm not mistaken.

 

if your user name has anything to do with what you drive, welcome to owning a da, wiring is a common problem, mine is having a bunch of issues,(seatbelt warning, etc...) so I went and got a new harness and installing all new wiring, and wire tuck

 

get a wiring diagram and start pinning out shit, get a volt meter

 

do you have factory headlamps?? i had to rewire my headlights to work right on my da without doing the jdm conversion(my headlights are not jdm by any means other than the type/number of plugs/lights)so my high beam light is always on.but i have 4 differnt settings for the lights....get ghetto and cut wires and run the back tail to front turn..

i have had 7 DA tegs and never had any lighting problems,so its not that common(atleast for me)

 

I just got my teg in a trade, and I also have headlight issues. The guy has an hid kit on it, and when I started looking around at the wiring, because one burnt out, I noticed that the wires for where the plug goes into the bult, 2 wires have been removed and the pins wired into the hid ballast. noticing that, I tryied to turn the high beams on, and nothing, so I looked at the bulb and its not a high low beam bulb. I have the jdm headlights, but I dont know if the wiring is any different, because I didnt install them. have you ever seen a hid kit with big ass ballast?

 

and as for the common wiring problems, thats what i was told when my seatbelt indicator started going beep beep all the time, hes owned a bunch of tegs tho, I dnt know much about da tegs beyond the motor