Where to Get my Wheels Painted
#1
Where to Get my Wheels Painted
Alright so I picked up some new Work Meister S1's and I am looking to get the center sections repainted/powdercoated. FIRST thing I did was call Precision Powder, but Lou told me that since the wheel had a polished lip and I didn't want that coated, then it wouid be risky and he advised I sand it and paint it.
For starters, I don't have the time to do it all by myself, so I am wondering if anyone knows a place that will either A. Powdercoat the centers or B. Paint the wheels for me. Any input would be great. Thanks!
For starters, I don't have the time to do it all by myself, so I am wondering if anyone knows a place that will either A. Powdercoat the centers or B. Paint the wheels for me. Any input would be great. Thanks!
#2
Re: Where to Get my Wheels Painted
Its hard to powder coat a section of a piece... Powder coating involves static in the "painting" process...
If it were me (but then again I'm a big DIY'er) I'd tape it and paint it myself...
Scuff w/ Scotch brite pad, wash w/ dawn THOROUGHLY, let dry THOROUGHLY, tape (don't half ass), prime and then shoot your paint before the primer stops flashing so you don't have to rescuff, rewash and retape...
If it were me (but then again I'm a big DIY'er) I'd tape it and paint it myself...
Scuff w/ Scotch brite pad, wash w/ dawn THOROUGHLY, let dry THOROUGHLY, tape (don't half ass), prime and then shoot your paint before the primer stops flashing so you don't have to rescuff, rewash and retape...
#4
Re: Where to Get my Wheels Painted
lou has done many wheels without coating a polished lip...
he has some 22 inch chrome wheels there the other day and they were powdercoating the spokes...
so he can definately coat the wheels without messing up the lips...
he has some 22 inch chrome wheels there the other day and they were powdercoating the spokes...
so he can definately coat the wheels without messing up the lips...
#6
Re: Where to Get my Wheels Painted
Naptime: I will shoot you a PM in a few. I am not sure how much something like this would even cost.
Thread
Thread Starter
Forum
Replies
Last Post