BlueDC2

What do i need to turn my automatic LS into a 5spd...I know the transmission, shift linkage, and axles. But is there anything else I need and does anyone have one I can buy possibly?

devils_civic

honda-tech.com; they probably have some helpful threads you can search though.

dont know everything about it but i know its gonna be a bitch to do. have to get manual pedal assembly, tranny, wire up the reverse light, ect. good luck.

Fabrik8

The ECU needs to be converted, I can do that for you for really cheap, like $20 if it's an OBD1 ECU.

Hatch Man(GsR)

Never done it on an integra, but you will need pedals, hydro lines, clutch master/slave cylinders, tranny, a new passenger side motor mount from hasport, and a lot of free time...

N/A POWERED

ha fun times, if you know what your doing it shouldnt take a long time, me and one of my friends did it in a day and a half....with the tranny mount you gotta cut off the automatic one and weld in the 5spd one...but we never did that and still dont have a mount and the car still runs fine and its boostin

lYellowDragonl

sell the car and get a manual one.....

FATBITCH

my buddy converted my car to manual and it was easy as crap 97 hx coupe

BlueDC2

I am trying to sell it but no one wants it.

Hatch Man(GsR)

the problem without using the right passenger mount is that your motor will sit at an angle, I actually dropped my motor on the ground at 40mph because I had my motor sitting that way waiting for the mount. I can tell you it is not a good idea not to use the mount.This is not that hard to do, the hardest thing is installing the pedals because it is so tight and you are working in an uncomfortable position...

9civic5

You don't need different axles. I still run my auto axles with no problem.