hi,
i just installed a brand new ACT clutch kit, pressure plate and disc, everything has been up back together and assembled properly, but when the car is off i'm able to put in on a gear, but when the car is on it dosent want to go into gear. this is drivin me crazy, specially when i need the car for monday, i've done this type of work many times before and never had this problem.

please help.

thanx

 

you have cable tranny ?

 

if you start it when its in 1st and release the clutch does it move ??????????

 

its a hydro tranny

 

sounds like the clutch needs to be bled

 

+1 ar you installed the disc backwards. There should have been a sticker/stamp labeled "flywheel" or "flywheel side" did you orient this side to go surface to surface against the flywheel?

 

yes, it had a sticker that said " this side on flywheel"

if i try to force it to 1st of 2nd the car moves a lil.

thanx

 

sounds like you need to bleed the clutch.

 

Yeah, sometimes to get a more effective bleed, (provided its not a hydraulic TO bearing) you need to lift/tilt the car so that the bleeder is on the higher side of the slave cylinder.